Browse all practice questions for the National Environmental Balancing Bureau (NEBB) Certified Professional (CP) Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

National Environmental Balancing Bureau (NEBB) Certified Professional (CP) Practice Exam course image
Understanding differential pressure: what it is and how it’s measured in HVAC systemsWhich term is defined as the difference between two pressures measured with respect to the same reference pressure?Understanding why validating sensor signals and control logic matters for functional performance in environmental systemsIn Functional Performance Testing, which statement best describes the purpose of validating that sensor signals and control logic produce intended actions and that equipment responds to setpoints and sequences?Velocity pressure is the moving-air pressure component that equals total pressure minus static pressure.Which term is defined as the velocity-related pressure component due to moving air and is equal to the difference between total pressure and static pressure?What an Air Handling Unit is and why it matters in building HVACAir Handling UnitWhat is a grille in air distribution systems and how does it differ from other face components?Which device is described as having a louvered or perforated face over an opening with no balancing damper integral to the device?What is the point where conditioned medium enters or leaves the distribution system called?A point where the controlled medium enters or leaves the distribution system is called what?What NPSH stands for and why it matters in pump guidanceNPSH is an acronym used in TAB discussions. What does it stand for?What TAB is really for in NEBB CP practice and how it confirms HVAC performanceWhat is the primary purpose of TAB in NEBB CP practice?
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which system is designed to pressurize stair and elevator shafts with outdoor air to prevent shaft infiltration during an alarm condition?
  • How do piecewise balancing and global balancing differ?
  • The capability of an instrument to indicate the true value of a measured quantity is called?
  • Which term is used to denote the velocity reading averaged across the duct cross-section?
  • Which engineering system uses fans to produce airflow and pressure differences across barriers to limit smoke movement?
  • The vector quantity that specifies the time rate of change of displacement is called?
  • Which NEBB publication outlines responsibilities, instrument standards, report requirements, measurement procedures and job performance expectations for CF, CP and CT?
  • Which statement best describes a Functional Performance Test (FPT) checklist?
  • An employee of the firm who has met technician level experience requirements and passed technician level examinations is a NEBB certified?
  • How does the Building Management System (BMS) factor into Functional Performance Testing?
  • What practical step should be taken when static pressure readings indicate a restriction in a duct run?
  • What is the purpose of a flow hood in TAB?
  • What information is captured in QA documentation to ensure data integrity?
  • What is the purpose of a balancing damper in a duct system?
  • The sum of static pressure and velocity pressure at the measurement point is called?
  • Which acronym identifies the engineer responsible for project plans and specifications?
  • Which statement best differentiates zone balancing from system balancing?
  • What is the role of the NEBB Certified Professional in the project team?
  • How can you verify that return air from one zone is not undesirably entering another zone?
  • The methodical proportioning of air and hydronic flows through the system mains, branches, and terminal devices using acceptable procedures to achieve the specified airflow or hydronic flow within installation, testing, and design limitations.
  • In NEBB terminology, which term designates data or actions that must be gathered to qualify a NEBB certified report?
  • The velocity pressure is defined as the difference between which two pressures?
  • Which term describes the implementation of actions that correct a deficiency?
  • What term defines the total height the fluid must be pumped, taking into account friction losses in the pipe?
  • Which term refers to any motor that is inaccessible without disassembling the equipment it is mounted in?
  • What does precision describe in measurement instrumentation?
  • Which term encompasses systems using a combination of mechanical equipment, airflow, water flow, and electrical energy for temperature and humidity control?
  • An individual who has passed the professional level certification examinations and maintains CP re-certification requirements is known as a?
  • Procedural activities for investigating a specific fault or failure of a system or piece of equipment are called?
  • Which term describes the process of evaluating and documenting HVAC airflow to ensure system performance?
  • In delta-T measurement practice, which statement is correct?
  • What is Point-to-Point Verification?
  • Which term describes a space within a building enclosed by smoke barriers and is part of a zoned smoke-control system?
  • How can static pressure readings help locate leaks or blockages in ductwork?
  • How do commissioning and retro-commissioning differ?
  • Which term describes a system that limits smoke movement by maintaining controlled pressure differences across barriers?
  • QAP stands for what in quality management?
  • The varying of system flows by partially closing balancing devices such as dampers and valves, and varying fan speeds to achieve optimum system operating conditions within design and installation limitations.
  • Which term denotes the rate at which outdoor air replaces indoor air within a defined space?
  • What should a commissioning plan typically include?
  • Which statement distinguishes Pre-Functional Testing from Functional Performance Testing in NEBB CP practice?
  • Which term refers to the unit that is used to describe very small lengths in precision measurement?
  • GRD stands for which grouping?
  • Which term denotes the height of the fluid surface on the suction side relative to the pump centerline?
  • What is the formal term for the systematic process applied to HVAC systems to determine and document air and hydronic flow rates?
  • Why is correct electrical wiring verification critical during balancing tests?
  • Which instrument is commonly used to measure velocity pressure in a duct during air balancing?
  • Which term describes the difference in air or water volume between the prime mover and the terminal elements?
  • What is a neutral pressure plane and why is it important in room-by-room balancing?
  • How is CFM verified during balancing?
  • Which term is defined as a test or inspection that validates a specified static condition such as pressure testing?
  • How is QA documentation used during field tests?
  • Which term describes current and complete project documents that supersede prior versions?
  • Which term refers to a NEBB designation for a firm that has met the firm certification requirements for TAB?
  • What does Delta-T signify in hydronic balancing and why is it important?
  • Which statement about pressure-independent balancing valves is true?
  • What does 'system turnover' mean in commissioning?
  • The act of comparing an instrument of unknown accuracy with a standard of known accuracy to detect, correlate, report, or correct by adjustment unacceptable variation in the accuracy of the tested instrument.
  • Which term describes the difference in air or water volume between the prime mover (fan or pump) and the terminal elements?
  • Which term describes a phenomenon that can cause undesired or unpredicted conditions that reduce capacities in all or part of a system and cannot be measured directly but can be estimated?
  • Energy can neither be created nor destroyed
  • How does reheat in an air distribution system affect balancing measurements?
  • What do zone balancing and system balancing collectively aim to achieve?
  • What is a piping leakage test and when is it typically required?
  • Why is thorough documentation essential in NEBB CP work?
  • Which term refers to any installation, measurement, or finding outside tolerances?
  • Why is a minimum airflow setpoint important in VAV systems?
  • What term corresponds to the height of the fluid surface above or below the centerline of a pump on the suction side?
  • What defines Acceptance Criteria in NEBB CP testing?
  • In NEBB CP practice, what is typically used to establish acceptance criteria for balancing?
  • How do airside and waterside balancing differ?
  • What is the activity that confirms a specific sensor to device is paired and connected to the proper controller?
  • When measuring SAT and RAT for delta-T, where should measurements be taken?
  • TSP stands for which pressure term?
  • In building systems, the acronym OA refers to what?
  • What is the purpose of establishing a pressure hierarchy in a multi-zone building?
  • What is the purpose of testing across multiple operating conditions in a balancing project?
  • What term describes the pressure due to weight of fluid above the measurement point in a closed system, when equal on both sides of the pump?
  • What is a punch list in the NEBB CP process?
  • In data collection for TAB, what is the primary purpose of using portable devices to log measurements?
  • How should Variable Frequency Drives (VFDs) be evaluated during balancing?
  • Which item is typically included in the testing procedures portion of a commissioning plan?
  • Fenestration is best described as which of the following?
  • What does SA stand for?
  • Which statement describes delta-T usage in TAB?
  • What is a potential consequence of incorrect electrical wiring during balancing?
  • EOR stands for which role responsible for project plans and specifications?
  • Which term refers to the device that regulates the amount and/or the temperature of the controlled medium?
  • What does AHU stand for in HVAC terminology?
  • Which term describes the use of specialized and calibrated instruments to measure parameters such as temperature, pressure, vapor flow, airflow, fluid flow, fluid quantities, rotational speed, electrical characteristics, velocity, sound and vibration level, air and hydronic quantities, and other data in order to determine performance, operation, or function?
  • A space within a building enclosed by smoke barriers and part of a zoned smoke-control system is called what?
  • VAV stands for which concept?
  • What is balancing tolerance and how is it used during tests?
  • Which statement best defines a procedure?
  • If the flow through a hydronic circuit remains constant and Delta-T increases, what does this imply?
  • In HVAC contexts, what does RTU stand for?
  • Why would a system use a pressure-independent balancing valve?
  • Which of the following is a use of ACH?
  • Which artifact documents that commissioning requirements were met and NEBB standards were followed?
  • Which document accurately represents system measurements obtained in accordance with the current NEBB Procedural Standard for Testing, Adjusting, and Balancing of Environmental Systems?
  • What role do as-built drawings play in the NEBB CP process?
  • Which term describes systems that provide heating, ventilating, air conditioning, humidification, and de-humidification for human comfort or process control?
  • What does CFM per square foot indicate in balancing practice?
  • What is fan pressure rise and how does it relate to balancing?
  • Which term is the outlet designed to mix supply air and room air and to distribute it in varying directions?
  • Which term describes the process of comparing an instrument against a standard in order to detect, report, or correct deviations by adjustment?
  • The local governing authority having jurisdiction over a designated portion of the project is known as?
  • Which term denotes the energy-related pressure component arising from moving air, defined as the difference between total pressure and static pressure?
  • What is the purpose of a balancing hood in air balancing?
  • Which term describes testing procedures and data gathering that enable further diagnostic review beyond the requirements for reporting certification?
  • Which safety requirement is typically followed during field work on mechanical systems?
  • In HVAC terminology, what does RA stand for?
  • Which document provides guidance on instrument standards and reporting for CF, CP and CT?
  • Which term refers to a written protocol that defines methods, personnel, and expectations for tests conducted on components, equipment, assemblies, systems, and interfaces among systems?
  • How should instrument calibration be managed during field testing?
  • What does RPM stand for?
  • What is the purpose of documenting operator training during commissioning?
  • Which term is used for the velocity measurement at the face of an opening?
  • Range refers to what in instrument measurement?
  • Which term is the outlet designed to mix supply air and room air?
  • Which term refers to a High Efficiency Particulate Air Filter with 99.97% efficiency at 0.3 micron?
  • Name two common categories of duct leakage measured during balance tests.
  • If a damper is misadjusted, what symptom would you most expect to observe during a balancing test?
  • Which item is typically handed over during system turnover?
  • What does SI stand for in measurement systems?
  • GRD is the abbreviation used for which grouping of components?
  • How is differential pressure used to calculate airflow in TAB?
  • Which term describes the action taken to correct nonconformities or out-of-tolerance conditions?
  • Which term describes the formal framework that ensures quality in operations?
  • In duct testing, how do static pressure and velocity pressure differ?
  • Resolution is defined as what in measurement?
  • What term refers to any opening in a building such as windows, skylights, doors, and other openings?
  • The Log-Tchebycheff Method is an alternative to which method for laying out a duct traverse?
  • Which factors are considered under thermal comfort during balancing?
  • Which term describes the point where the controlled medium enters or leaves the distribution system?
  • Which sequence correctly outlines typical commissioning activities for an HVAC project?
  • In VAV balancing, the minimum airflow setpoint is important because it:
  • What does a 'pressure hierarchy' refer to in a multi-zone building?
  • What is potable water?
  • In NEBB Instrumentation and Calibration, which phrase describes 'the particular type of data measurement'?
  • Which vector quantity represents the time rate of change of velocity?
  • Which term refers to an HVAC device installed on the roof to condition air?
  • What does ESP stand for in duct testing terminology?
  • Which system is intended to positively pressurize stair towers with outdoor air to keep smoke from contaminating the stair towers during an alarm condition?
  • Which term describes a defined sequence of work or operations to produce repeatable results?
  • Which law prohibits heat transfer from a colder body to a hotter body without external work?
  • During balancing, why is it important to verify that zone layouts match the design and measured airflow aligns with intended zones?
  • Which statement describes the focus of Pre-Functional Testing in a TAB sequence?
  • In the TAB sequence, when is Pre-Functional Testing typically performed?
  • What is the purpose of smoke visualization during balancing?
  • What tools are commonly used to record field data during TAB?
  • In HVAC terminology, what is a register?
  • In scheduling terms, to schedule or order activities so as to be available or complete when needed is described by which term?
  • Which mathematical term represents the non-negative value of a real number when its sign is ignored?
  • TAB stands for Testing, Adjusting, and Balancing. Which option correctly completes the acronym?
  • Which term refers to repairs, replacements, rebuilding, calibration, or adjustment of equipment or systems?
  • In commissioning, what is the typical next step if field tests show persistent delta-T outside acceptance after balancing?
  • Which mathematical term refers to the numerical value of a quantity ignoring its sign?
  • Who must supervise a NEBB Certified Technician (CT) according to NEBB requirements?
  • How should balancing be handled in systems with economizers?
  • Which term identifies the device that regulates the amount and/or the temperature of the controlled medium?
  • A unit equal to one-millionth of a meter, commonly used for very small lengths, is called a?
  • Which term describes the common duct traversing method that averages velocity readings taken from the centers of equal areas of the duct cross-section?
  • Which term best describes the act of changing damper positions and fan speeds to optimize system operation within limits?
  • DX stands for which refrigerant system type?
  • What is the purpose of a balancing valve in a hydronic circuit?
  • The number of times the total air volume of a defined space is replaced in a given unit of time.
  • IP stands for which measurement system used in the United States and elsewhere?
  • Which term denotes a rooftop air conditioning unit?
  • What additional considerations apply to balancing in hospital or cleanroom environments?
  • Which law states energy cannot be created or destroyed?
  • Which term refers to the use of specialized instruments to measure parameters to determine performance, operation, or function?
  • It is impossible for a self-acting machine, unaided by any external agency, to convey heat from a body of lower temperature to one of higher temperature
  • What is the term for an adjustable mechanical device that locks a valve in a predefined position when reopened?
  • Which term represents the potential energy available at the measurement point to drive flow against system resistance, which can be positive or negative relative to the reference pressure?
  • Which term is the documented plan outlining how tests are performed, who conducts them, and what is expected to be achieved across system interfaces?
  • If calibration is out of tolerance, what should be done?
  • A firm that has met and maintains all NEBB requirements for TAB certification and is currently certified is known as a?
  • Which term describes the dynamic measurement of a pump's total dynamic head at no flow, performed by closing the pump discharge valve only?
  • Where should temperature sensors be located for accurate room measurements?
  • Which term describes a space within a building that is enclosed by smoke barriers and is part of a zoned smoke-control system?
  • The rate at which outdoor air replaces indoor air within a given space or room.
  • Which method is an alternative approved approach to laying out a duct traverse as opposed to the Equal Area Method?
  • Return Air is best described as what?
  • A volume of building served by a single ventilation system in natural ventilation context is called?
  • Which filtration component is defined as an extended media, dry type filter in a rigid frame with minimum particle-collection efficiency of 99.97 percent for 0.3 micron particulate at a rated airflow?
  • What does air changes per hour (ACH) measure?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy